Tantalum Forged Pipe Fittings Manufacturers, Suppliers, Stockist – Tantalum Socket Weld Pipe Fittings, Tantalum Threaded Pipe Fittings Factory – ANSI B16.11, BS3799

Forged Pipe Fittings Manufacturers

Tantalum Forged Pipe Fittings Manufacturers

Types of Tantalum Socket Welded & Tantalum Threaded Forged Steel Pipe Fittings

  1. Tantalum Elbows (90 Degree Elbows and 45 Degree Elbows) – A pipe elbow is a forged steel fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction. Similar to a reducing tee, reducing elbows also exist to simultaneously change flow direction and reduce flow diameter. Street Elbows have one female end to accept pipe and another male end thread that is the same size as the pipe and can avoid the use of a pipe nipple during installation.
  2. Tantalum Tees (Equal Tee and Reducing Tees)- Tees are a type of forged steel fitting used to combine or divide process flow, and Reducing Tees additionally allow for pipe size change. The run outlets of the tee are the two in-line outlets, and the branch is the third outlet. The branch outlet is the reducing outlet in a reducing tee.
  3. Tantalum Couplings (Straight and Reducing Couplings, Full and Half Couplings) – Couplings are a forged steel fitting used to connect two lengths of pipe, and Half-coupling is screwed onto the pipe, while the other end is made to be tightly inserted, or welded, onto the other end to pipe or vessel. Standard Couplings have female threads or open sockets at both ends, whereas reducing couplings connect smaller pipes to larger ones.
  4. Tantalum Unions (Socket Weld Unions and Threaded Unions) – Unions are a forged steel fitting similar to a coupling but allow a convenient disconnection and connection; it has 3 parts: a nut, a female end, and a male end. They allow two lengths of pipe to be assembled and detached without causing any deformation to the pipes.
  5. Tantalum Bushings (Hex Head Bushings and Flush Bushings) – Reducing inserts and Bushings are forged steel fittings that allow for a change in pipe size. Pictured here is the hex head bushing, which is most commonly used.
  6. Tantalum Caps (Pipe Caps and End Caps) – Caps are forged steel fittings used to terminate the flow, inserting over the end of the pipe.
  7. Tantalum Plug (Square Head Plugs, Hex Head Plugs and Round Head Plugs) – Similar to a cap, plugs are forged steel fittings that are inserted into the end of the pipe, and they come with different head types, including: hex, square, and round.
  8. Tantalum Cross – Crosses are a 4-way forged steel fitting, with 1 inlet and 3 outlets or vice versa. These are sometimes referred to as 4-way tees.
  9. Tantalum Outlets (Weldolets, Sockolets, Threadolets, Elbolets, Latrolets and Nipolets)
  10. Tantalum Nipples (Hexagonal Nipples and Swaged Nipples)

Production & Supply Range of Tantalum Forged Fittings

Grade R05200 (Ta1), R05252 (Ta2.5W), R05255 (Ta10W), R05240 (TaNb40)
Purity 99.95%, 99.99%, Tantalum alloy
Test Certificates Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report
Size 1/2″ to 18″
Surface Grounded, Polished, Bright Polishing and Machined Surface
Color Metallic color
Processing Hot forging, Linear cutting, Water jet cutting
Melting point 2996℃
Boiling point 5425℃
Density 16.65g/cm3
State Annealing or Hard state
  • Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. We are not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.

ASTM Product Specification of Tantalum

  • UNS Grade R05200—Unalloyed tantalum, vacuum melted.
  • UNS Grade R05400—Unalloyed tantalum, powder-metallurgy consolidation.
  • UNS Grade R05252—Tantalum+2.5% tungsten alloy, vacuum melted.
  • UNS Grade R05255—Tantalum+10% tungsten alloy, vacuum melted.
  • UNS Grade R05240—Tantalum alloy, 60% tantalum, 40% niobium, electron-beam furnace or vacuum arc melt,  or both.
Tantalum Bar, Rod, Tube, Plate, Sheet, Strip, Foil, Machined Components, Powder
ATI Ta10W™ Billet, Bar, Rod, Tube, Plate, Machined Components
ATI Ta2.5W™ Sheet, Tube, Machined Components
ATI Ta40Nb™ Billet, Bar, Rod, Tube, Plate

Chemical Properties of Tantalum Forged Fittings

Element R05200 (%,Max) R05400 (%,Max)
C 0.01 0.01
O 0.015 0.03
N 0.01 0.01
H 0.0015 0.0015
Fe 0.01 0.01
Mo 0.02 0.02
Nb 0.1 0.1
Ni 0.01 0.01
Si 0.005 0.005
Ti 0.01 0.01
W 0.05 0.05

Mechanical and Thermal Properties of Tantalum Forged Fittings

Properties Metric Imperial
Tensile strength 900 MPa 131000 psi
Poisson’s ratio 0.35 0.35
Modulus of elasticity 186 GPa 27000 ksi
Shear modulus 69 GPa 10000 ksi
Hardness, Vickers 200 200
Hardness, Brinell 195 195
Hardness, Rockwell A 56 56
Hardness, Rockwell B 92 92
Hardness, Rockwell C 12 12
Thermal expansion co-efficient (@20°C/68°F) 6.50 µm/m°C 3.61 µin/in°F
Thermal conductivity 54.4 W/mK 378 BTU in/hr.ft².°F

Physical Properties of Tantalum Forged Fittings

Atomic number 73
Atomic weight 180.95
Relative abundance in Earth’s crust, % 2.1 × 10–4
Crystal structure Body-centered cubic
Lattice constant, nm a = 0.33025
Density, g/cm3 16.6
Melting point, °C 2,996
Boiling point, °C 5,425
Heat of fusion, kJ/mol 28.5
Heat of vaporization at 3,273 K, kJ mol–1 78.1
Specific heat capacity at 20°C, J mol–1 K–1 25.41
Linear coefficient of thermal expansion at 20°C, K–1 6.5 × 10–6
Thermal conductivity at 20°C, W m–1 K–1 54.4
Specific electrical conductivity at 20°C, Ω–1 cm–1 0.081
Superconductivity, K 4.3
Temperature coefficient (0–100°C) 0.00383
  • The mechanical properties of the metal are strongly dependent on its purity, structure, and crystal defects, as is the case with almost all refractory metals.
  • Even low concentrations of interstitial impurities increase the hardness and reduce the ductility.
  • The yield strength is strongly temperature dependent, the value at 200°C being ca. 30% of that at 20°C.

What is Tantalum?

Tantalum is a chemical element with symbol Ta and atomic number 73. Previously known as tantalium, its name comes from Tantalus, a hero from Greek mythology. Tantalum (Ta) is a dark blue-gray metal that is very heavy, ductile, and hard and has high corrosion resistance. Tantalum is especially resistant to chemicals at temperatures below 150 °C and can only be dissolved with hydrofluoric acid. It has the fourth-highest melting point of all metals and is able to form extremely thin and protective oxide layers for high-quality capacitors, making it an excellent material for tubes. It is part of the refractory metals group, which are widely used as minor components in alloys. The chemical inertness of tantalum makes it a valuable substance for laboratory equipment and a substitute for platinum. Tantalum is also used for medical implants and bone repair. Its main use today is in tantalum capacitors in electronic equipment such as mobile phones, DVD players, video game systems and computers. Tantalum, always together with the chemically similar niobium, occurs in the minerals tantalite, columbite and coltan (a mix of columbite and tantalite). Tantalum is a rare metal, comprising just 8×10−9% of the universe, making it fifteen times less abundant in the universe than gold (which makes up 6×10−8%). Tantalum also comprises just 1.5×10−4% of the earth’s crust, making it more abundant than other metals in the sixth period, such as rhenium (abundance 2.6×10−7%), osmium (abundance 1.8×10−7%), or iridium (abundance 4×10−8%), but not as abundant as barium (abundance 3.4×10−2%).

Properties of Tantalum Forged Fittings

  • Resistance to high temperature
  • Strong corrosion resistance
  • Good ductility
  • Low Density and High Strength
  • Good resistance to effect of heat
  • Excellent Bearing to cryogenic property
  • Nonmagnetic and Non-toxic
  • Good thermal properties
  • Low Modulus of Elasticity   

Applications of Tantalum Forged Fittings

  • Industrial furnace
  • Chemical industry
  • Aerospace
  • Marine
  • Healthcare industry
  • Solid electrolytic capacitor
  • Radar
  • Aircraft
  • Electronic computer
  • Used for heat exchanger pipes, condensers, bayonet heaters, helical coils, thermocouple, and protective tubes, etc.
  • Part of reactive tank
  • Electronic transmitting tube
  • Part of high temperature electronic tube
  • Bone plate for medical, bolt for medical, suture needles
  • Used for the manufacturing of reaction vessels.

Types of Tantalum Products

Tantalum Anode, Platinum coated Tantalum Gauze Tantalum Rod
Tantalum Balls Tantalum Heat Exchangers Tantalum Samples
Tantalum Bands Tantalum High Temperature Shields Tantalum Shaving
Tantalum Bars Tantalum Honeycomb Tantalum Sheets
Tantalum Blocks Tantalum Ingot Tantalum Shot
Tantalum Boats Tantalum Lump Tantalum Single Crystal
Tantalum Capacitor Paste Tantalum Marker Bands Tantalum Sleeves
Tantalum Capacitor Powder Tantalum Mesh Tantalum Slugs
Tantalum Chunk Tantalum Metal Tantalum Specimens
Tantalum Coil Tantalum Microfoil Tantalum Spheres
Tantalum Columns Tantalum Microleaf Tantalum Sponge
Tantalum Concentrate Tantalum Nuts Tantalum Spring
Tantalum Crucibles Tantalum Particles Tantalum Strip
Tantalum Cubes Tantalum Parts Tantalum Tape
Tantalum Cylinder Tantalum Pellets Tantalum Tube
Tantalum Disc Tantalum Pieces Tantalum Vessels
Tantalum Electrodes Tantalum Plates Tantalum Wafer
Tantalum Flake Tantalum Powder Tantalum Washer
Tantalum Flanges Tantalum Puck Tantalum Wire
Tantalum Foam Tantalum Ribbon Tantalum Wire, Platinum-coated
Tantalum Foil Tantalum Ribbon, Platinum-coated Tantalum Wool
Tantalum Furnace Elements Tantalum Wire, Platinum-coated
Tantalum Granules Tantalum Rings

Testing & Inspection of Tantalum Forged Fittings

Testing (Destructive, Non Destructive)

Positive Material Identification – PMI Testing Hydrostatic Test
Chemical Analysis – Spectro Analysis Hydrogen-Induced Cracking (HIC) Test
Mechanical Testing Such as Tensile, Elongation, Reduction of Area Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Micro Test Radiography Test
Macro Test Dye Penetrant Test (DP Test)
Hardness Test Ultra Sonic Test (UT)
Pitting Resistance Test Eddy Current Testing
Intergranular Corrosion (IGC) Test Impact Test
Flaring Test Bend Test
Flattening Test

Inspection

  • Our internal inspection reports would be provided for all the goods before shipment.
  • Buyers or their associates are most welcome to visit us for personal inspect
  • We regularly have inspections ongoing at our premises from internationally acclaimed Inspection Agencies such as TUV, BVIS, SGS, Llyods, DNV etc.

Prices for Tantalum Forged Fittings

Prices for Tantalum Forged Fittings are directly co related to prices of the raw materials such as iron ore, metal scrap, chromium, nickel and various other alloying elements. The production cost of heat resistant stainless steel and nickel alloy plates is high as they contain high amount of nickel and chromium. Meanwhile, mild steel material is among the lowest cost steel available, followed by carbon steel, 400 series stainless steels, aluminium, alloy steel, and 300 series stainless steel. Special alloys such as Titanium, Inconel, Monel and Hastelloy cost very high as the nickel, chromium and moly content is very high.

For special and discounted prices for various types of Tantalum Forged Fittings, please feel free to contact us through email, phone or whatsapp.

We are also regularly publishing our price list for various steel products on our blog.

Documents Provided – Domestic Sales or Export of Tantalum Forged Fittings

Certificate of Origin Raw Material Test Reports
Commercial Invoice Heat Treatment Charts
Packing List Quality Assurance Plan (QAP)
Fumigation Certificates NABL approved Laboratory Test Reports
Letter of Guarantee Material Test Certificates
ROHS Certificate Certificate of Compliance/Conformity

Price Terms for Tantalum Forged Fittings

We can offer any of the following price basis depending on your requirement:

  • Ex-works
  • FOR Site in India
  • FOB Nhava Sheva
  • CFR, CIF, CPT your destination port
  • Door to Door Delivery Duty Paid as well as Duty Unpaid

Delivery Time of Tantalum Forged Fittings

  • If the items are available in stock, we take 2 days from the date of receipt of advance payment to clear the shipment and send it to port.
  • And in-case the items are not available in stock, the time taken for manufacturing depends on the size, quantity and grade.
  • However we can claim the fact that we can compete with anyone in India on Delivery time and most of the time our production time is the least.
  • We have tied up with strong logistic partners in India which can undertake any type of shipping activities and make sure that there is no delay in shipment.

Marking & Packing of Tantalum Forged Fittings

  • All our products will have complete marking details which are co-related to the test certificates we supply.
  • In case of orders for cut piece of Pipes, Sheets or Round Bars, the marking is transferred from the product from which it is cut. In such cases we provide Letter confirming the marking transfer and picture of the product from which it is cut.
  • All goods are packed in wooden cases or pallets.

Suppliers of Tantalum Forged Fittings in India

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Jaipur, Visakhapatnam, Kanpur, Nagpur, Lucknow, Thane, Bhopal, Indore, Pimpri Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Agra, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivli, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Howrah, Ranchi, Gwalior, Jabalpur, Coimbatore, Vijayawada, Jodhpur, Madurai, Raipur, Chandigarh, Guntur, Guwahati, Solapur, Hubli–Dharwad, Mysore, Tiruchirappalli, Bareilly, Moradabad, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Jalgaon, Kota, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Rourkela, Nanded, Kolhapur, Ajmer, Akola, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Thiruvananthapuram, Udaipur, Kakinada, Davanagere, Kozhikode, Maheshtala, Rajpur, Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Sagar, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Sambalpur, Bilaspur, Shahjahanpur, Satara, Bijapur, Kurnool, Rampur, Shimoga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Nizamabad, Parbhani, Tumkur, Khammam, Ozhukarai, Bihar Sharif, Panipat, Darbhanga, Bally, Aizawl, Dewas, Ichalkaranji, Karnal, Bathinda, Jalna, Eluru, Barasat, Kirari Suleman Nagar, Purnia, Satna, Mau, Sonipat, Farrukhabad, Durg, Imphal, Ratlam, Hapur, Arrah, Anantapur, Karimnagar, Etawah, Ambarnath, North Dumdum, Bharatpur, Begusarai, New Delhi, Gandhidham, Baranagar, Tiruvottiyur, Pondicherry, Sikar, Thoothukudi, Rewa, Mirzapur, Raichur, Pali, Ramagundam, Haridwar, Vijayanagaram, Tenali, Nagercoil, Sri Ganganagar, Karawal Nagar, Mango, Thanjavur, Bulandshahr, Uluberia, Katni, Sambhal, Singrauli, Nadiad, Secunderabad, Naihati, Yamunanagar, Bidhannagar, Pallavaram, Bidar, Munger, Panchkula, Burhanpur, Raurkela Industrial Township, Kharagpur, Dindigul, Gandhinagar, Hospet, Nangloi Jat, Malda, Ongole, Deoghar, Chapra, Haldia, Khandwa, Nandyal, Morena, Amroha, Anand, Bhind, Bhalswa Jahangir Pur, Madhyamgram, Bhiwani, Berhampore, Ambala, Morbi, Fatehpur, Raebareli, Mahaboobnagar, Chittoor, Bhusawal, Orai, Bahraich, Vellore, Mehsana, Raiganj, Sirsa, Danapur, Serampore, Sultan Pur Majra, Guna, Jaunpur, Panvel, Shivpuri, Surendranagar Dudhrej, Unnao, Chinsurah, Alappuzha, Kottayam, Machilipatnam, Shimla. Adoni, Udupi, Katihar, Proddatur, Saharsa, Hindupur, Sasaram, Hajipur, Bhimavaram, Kumbakonam, Dehri, Madanapalle, Siwan, Bettiah, Guntakal, Srikakulam, Motihari, Dharmavaram, Gudivada, Phagwara, Narasaraopet, Suryapet, Miryalaguda, Tadipatri, Karaikudi, Kishanganj, Jamalpur, Ballia, Kavali, Tadepalligudem, Amaravati, Buxar, Jehanabad, Aurangabad, Gangtok

Exporters of Tantalum Forged Fittings

  • America: Antigua and Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Suriname, Trinidad and Tobago, United States, Uruguay, Venezuela
  • Europe – Albania, Andorra, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Euro area, Faroe Islands, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Isle of Man, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom
  • Africa – Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea Bissau, Ivory Coast, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Republic of the Congo, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
  • Asia – Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, East Timor, Georgia, Hong Kong, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Macao, Malaysia, Maldives, Mongolia, Myanmar, Nepal, Oman, Palestine, Philippines, Qatar, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Turkmenistan, United Arab Emirates, Uzbekistan, Vietnam, Yemen
  • Australia – Australia, Fiji, Kiribati, New Caledonia, New Zealand, Papua New Guinea, Samoa, Solomon Islands, Tonga, Vanuatu