ASME B16.9 Short Radius Elbow Pipe Fitting Manufacturers, Stockist, Suppliers – Seamless Elbow, Welded Elbow, Large Diameter Fabricated Elbow Factory

  • We are a specialist manufacturer of short radius elbows or pipe elbows in size range of 1/2″ to 48″ in accordance with ASME B16.9. We also produce custom size elbows as per design or drawing from our customers. Elbows can be manufactured in seamless, welded or fabricated form. While seamless elbows can be produced upto size of 24″, we can produce welded and fabricated reducers upto a size range of 48″ or even higher in some cases.
  • A pipe elbow is a pipe fitting that helps an engineer to change the direction of the pipe in a piping system. According to the angle, there are three most commonly used elbows 45°, 90°, and 180° according to engineering needs. An elbow is one of the most commonly used type of buttweld pipe fittings, produce as per ASME B16.9 dimensional specifications.
  • What is a Short Radius Elbow?
    • Short radius elbow’s radius is equal to the NPS in inches (R = 1.0D). Short radii are generally used in low pressure fluids or where the elbows are limited during installation. Long-radius elbows are preferred if there are no conditions or are not specified in the contract.
    • S/R 45°Elbow – Short radius 45° elbow changes the direction by 45 degrees.
    • S/R 90°Elbow – Short Radius 90° elbow is same as LR90 except for the measurement between end of elbow to center line is 1 x NPS.
    • S/R 180°Elbow- Short Radius 180° return bend allows complete reversal of flow.
  • What is a Long Radius Elbow?
    • The center to face distance for a “long” radius elbow, the LR radius elbows have a center to end distance that is 1.5 times the NPS in inches (R = 1.5D), if it is more than 1.5 times, it is a bend. D is the diameter of the elbow. Long radius elbows are more commonly used compared to short radius elbows. Generally, the default is also a long radius. Where the pressure is high or the flow rate is high, a long radius is used. If the resistance of the solid conveying pipe is strict, a larger radius elbow is used.
    • L/R 45°Elbow – Long radius 45 degree elbow changes the direction by 45 degrees.
    • L/R 90°Elbow – Long radius 90 degree elbow changes the direction by 90 degrees.
    • L/R 180°Elbow – Long radius 180 degree elbow changes the direction by 180 degrees.

Short Radius Elbow Production Range & Product Specifications

ProductShort Radius Elbow
TypeSeamless, Pipe Welded, Fabricated
SizeSeamless: 1/2″ – 24″; welded: 8″ – 100″
Thickness1mm to 25mm
StandardsASME B16.9, DIN, ISO, ASTM
Surface FinishAnnealed & Pickled, Transparent oil, Black Oil or Hot Dip Galvanized
Test CertificateEN 10204 3.1
  • Please contact us for any further question or inquiry regarding pipe elbows. We will promptly reply to you and offer you a reasonable price. We can manufacture long radius and short radius elbows in stainless steel, alloy steel and carbon steel. We provide these pipe fittings at market leading rates and we also offer price guarantee for all the products we offer to sale.

Material Grades for Producing Short Radius Elbows

Stainless Steel304, 304L, 306, 316L, 304H, 309S, 309H, 310S, 310H, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L
Duplex & Super Duplex SteelUNS S31803, UNS S32205, UNS S32750, UNS S32760
Carbon SteelASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C
Alloy SteelASTM / ASME A 182, ASTM / ASME A 335, ASTM / ASME A 234 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM / ASME A 691 GR 1 CR, 1 1/4 CR, 2 1/4 CR, 5 CR, 9CR, 91
Copper Alloy SteelASTM/ASME SB 111 UNS NO. C10100, C10200, C10300, C10800, C12000, C12200, C70600, C71500, ASTM / ASME SB 466 UNS NO. C70600 ( CU -NI- 90/10), C71500 ( CU-NI- 70/30)
Nickel Alloy SteelASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)

Dimensions of ASME B16.9 Short Radius Elbows

Drawing of ASME B16.9 Short Radius Elbows
Nominal SizeOutside Diameter at BevelCenter to End
NPSmm.A
in.mm.
in.
133.425
1.321
1 1/442.232
1.661.25
1 1/248.338
1.91.5
260.351
2.382
2 1/27364
2.882.5
388.976
3.53
3 1/2101.689
43.5
4114.3102
4.54
5141.3127
5.565
6168.3152
6.626
8219.1203
8.628
10273254
10.7510
12323.8305
12.7512
14355.6356
1414
16406.4406
1616
18457457
1818
20508508
2020
22559559
2222
24610610
2424

Long Radius & Short Radius 90 Degree Elbow Weights (KGS)

WEIGHTS OF FITTINGS
NPSELBOWSELBOWS
inchesLR 90°SR 90°
 Sch.Sch.Sch.Sch.Sch.Sch.Sch.Sch.
 5S10S40S80S5S10S40S80S
1/20.050.060.080.10.030.040.050.07
3/40.060.070.090.110.040.050.060.07
10.090.150.180.20.060.10.120.13
1 1/40.130.20.250.350.090.130.170.12
1 1/20.180.30.40.50.120.20.270.33
20.30.50.70.90.20.330.470.6
2 1/20.60.851.351.80.40.60.91.2
30.91.322.90.60.91.351.9
41.4245.90.91.352.653.9
52.93.66.59.71.952.44.356.5
64510.5162.73.35710.5
87.41021.533.54.96.714.522.5
1013.616.838.552.59.111.225.635
1223.427597915.61839.553
142935709419.323.54763
1641.3479512527.531.563.584
1851.85912015834.539.580105
207385146194495798129
241221402102828294140188
Approximate weights in kg, density 8 kg/dm3