Nickel Aluminium Bronze Forged Fittings Manufacturers, Suppliers – Cu-Al-Ni-Fe Socket Weld Pipe Fittings, Cu-Al-Ni-Fe Threaded Pipe Fittings – ANSI B16.11, BS3799 Distributors

Forged Pipe Fittings Manufacturers

Nickel Aluminium Bronze Forged Pipe Fittings Manufacturers

Types of Nickel Aluminium Bronze Socket Welded & Nickel Aluminium Bronze Threaded Forged Steel Pipe Fittings

  1. Nickel Aluminium Bronze Elbows (90 Degree Elbows and 45 Degree Elbows) – A pipe elbow is a forged steel fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction. Similar to a reducing tee, reducing elbows also exist to simultaneously change flow direction and reduce flow diameter. Street Elbows have one female end to accept pipe and another male end thread that is the same size as the pipe and can avoid the use of a pipe nipple during installation.
  2. Nickel Aluminium Bronze Tees (Equal Tee and Reducing Tees)- Tees are a type of forged steel fitting used to combine or divide process flow, and Reducing Tees additionally allow for pipe size change. The run outlets of the tee are the two in-line outlets, and the branch is the third outlet. The branch outlet is the reducing outlet in a reducing tee.
  3. Nickel Aluminium Bronze Couplings (Straight and Reducing Couplings, Full and Half Couplings) – Couplings are a forged steel fitting used to connect two lengths of pipe, and Half-coupling is screwed onto the pipe, while the other end is made to be tightly inserted, or welded, onto the other end to pipe or vessel. Standard Couplings have female threads or open sockets at both ends, whereas reducing couplings connect smaller pipes to larger ones.
  4. Nickel Aluminium Bronze Unions (Socket Weld Unions and Threaded Unions) – Unions are a forged steel fitting similar to a coupling but allow a convenient disconnection and connection; it has 3 parts: a nut, a female end, and a male end. They allow two lengths of pipe to be assembled and detached without causing any deformation to the pipes.
  5. Nickel Aluminium Bronze Bushings (Hex Head Bushings and Flush Bushings) – Reducing inserts and Bushings are forged steel fittings that allow for a change in pipe size. Pictured here is the hex head bushing, which is most commonly used.
  6. Nickel Aluminium Bronze Caps (Pipe Caps and End Caps) – Caps are forged steel fittings used to terminate the flow, inserting over the end of the pipe.
  7. Nickel Aluminium Bronze Plug (Square Head Plugs, Hex Head Plugs and Round Head Plugs) – Similar to a cap, plugs are forged steel fittings that are inserted into the end of the pipe, and they come with different head types, including: hex, square, and round.
  8. Nickel Aluminium Bronze Cross – Crosses are a 4-way forged steel fitting, with 1 inlet and 3 outlets or vice versa. These are sometimes referred to as 4-way tees.
  9. Nickel Aluminium Bronze Outlets (Weldolets, Sockolets, Threadolets, Elbolets, Latrolets and Nipolets)
  10. Nickel Aluminium Bronze Nipples (Hexagonal Nipples and Swaged Nipples)

Production and Stock Range of Nickel Aluminium Bronze Forged Fittings

MATERIAL:Nickel Aluminium Bronze Forged Fittings
GRADE:C95500
EQUIVALENT:CuAl10Fe5Ni5-B | CB333G
SPECIFICATION:AMS 4640, AMS 4880, AMS 4881 and AMS 4590, BS2 B23, NFL14-702, NFL14-705 and NFL14-706. The aircraft companies and main subcontractors also have their own specifications, for example Airbus ASN-A 3406, ASN-A 3315, ASN-A6127A and Rolls Royce MSRR 8503.
SIZE:1/2″ to 18″; Thickness 0.6mm to 20mm
SURFACE:Pickled, Turned or Ground
MOLECULAR FORMULA:Cu-Al-Ni-Fe
COMPONENT:Al: 8.7 – 9.5; Cu: Rem; Fe: 3.5 – 4.3; Pb: 0.02; Mn: 1.2 – 2.0; Ni: 4.0 – 4.8; Si: 0.1.

Specification of Nickel Aluminium Bronze

Size (round bar)1″ – 10″ Diameter
Bar/RodASTM B150
Bar, ForgingASTM B124
Electrode, WeldingAWS A5.6, MILITARY MIL-E-23765/3
Forgings, DieASTM B283
PlateASTM B171
Rod, ForgingASTM B124
Shapes, ForgingASTM B124
Pipe/TubeASTM B315
ShapesAMS 4590, ASTM B150
CentrifugalASTM B271, SAE J462, J461, AMS 4880
ContinuousASTM B505, SAE J462, J461, AMS 4880
IngotASTM B30
PrecisionASTM B806
SandASTM B148, B763, SAE J461, J462

Size Range of Nickel Aluminium Bronze

ROUND RODS8mm To 70 mm
HEX10mm To 60mm
SQUARE10mm To 60mm
FLAT10mm Min Thickness and max Width 120mm
BILLETSUp to 200 mm
INGOTSAs per Specification

Chemical Properties of C95500 Nickel Aluminium Bronze Forged Fittings

Cu%Sn%Pb%Zn%Fe%Ni%Sb%P%S%AI%Mn%Si%
78 minN/AN/AN/A3.00-53.00-5.5N/AN/AN/A10.00-11.53.5N/A

Mechanical Properties of C95500 Nickel Aluminium Bronze Forged Fittings

Tensile Strength, min95 ksi655 MPa
Yield Strength @ .5% ext under load min42 ksi290 MPa
Elongation in 2 in. or 50 mm min, %10
Brinell Hardness208
Machinability Rating50%

Physical Properties of C95500 Nickel Aluminium Bronze Forged Fittings

US CustomaryMetric
Melting Point-Liquidus1930 °F1054 °C
Melting Point-Solidus1900 °F1038 °C
Density0.272 lb/in 37.53 gm/cm 3
@ 68 °F@ 20 °C
Specific Gravity7.537.53
Electrical ResistivityN/AN/A
Electrical Conductivity8% IACS0.049 MegaSiemens/cm
@ 68 °F@ 20 C
Thermal Conductivity24.2 Btu/sq ft/ft hr/°F41.9 W/m
@ 68 °F@ 20 °C
Coefficient of9 ⋅ 10-6 per °F15.5 ⋅ 10-6 per °C
Thermal Expansion(68-212 °F)(20-100 °C)
Specific Heat Capacity0.1 Btu/lb/°F 419 J/kg
@ 68 °F@293 °C
Modulus of Elasticity in Tension16000 ksi110000 MPa
Magnetic Permeability*1.321.32
*Field Strength 16 kA/m

What is Nickel Aluminium Bronze?

Aluminium bronze is a type of bronze in which aluminium is the main alloying metal added to copper, in contrast to standard bronze (copper and tin) or brass (copper and zinc). There are two major groups in the Aluminum Bronze family. Aluminum Bronze contains approximately 9-14% aluminum and 4% iron while Nickel Aluminum Bronze contains approximately 9-11% aluminum, 4% iron and 5% nickel.  That addition of iron and nickel in the latter further improves the corrosion resistance of a material that is already strong in this area. Increasing the aluminum content of bronze results in higher strength. These nickel aluminum bronze alloys are used for bushings, bearings, wear plates, and hydraulic valve components. Nickel aluminum bronze is available in rod, tube, and plate forms.

Properties of Nickel Aluminium Bronze Forged Fittings

• Excellent wear and galling resistance
• High strength
• Density (10% lighter than steel)
• Non-sparking
• Low magnetic permeability (of <1.03 µ in selected grades)
• High corrosion resistance
• Good stress corrosion properties
• Good cryogenic properties
• High resistance to cavitation
• Damping capacity twice that of steel
• High resistance to biofouling
• A protective oxide surface film which has the ability to self-repair.

Applications of Nickel Aluminium Bronze Forged Fittings

1) Aerospace
2) Architecture
3) Marine – defense
4) Marine – commercial
5) Offshore oil/gas and petrochemical
6) Desalination and water condenser systems.

Types of Nickel Aluminium Bronze Products

Nickel Aluminium Bronze Hollow PipeNickel Aluminium Bronze Heater for High Temperature
Nickel Aluminium Bronze Seamless PipeNickel Aluminium Bronze Heat Exchanger Tube
Nickel Aluminium Bronze Bush Hex PipePotassium-doped Nickel Aluminium Bronze Wire
Nickel Aluminium Bronze Round PipeNickel Aluminium Bronze Welded Pipe
Nickel Aluminium Bronze Alloy Round PipeNickel Aluminium Bronze Rotating target
Nickel Aluminium Bronze Aero engine tubeNickel Aluminium Bronze Custom Pipe
Nickel Aluminium Bronze Alloy Custom PipeNickel Aluminium Bronze Thick Wall Pipe
Nickel Aluminium Bronze Elliptical and Oval TubeNickel Aluminium Bronze Thin Wall Pipe
Nickel Aluminium Bronze Pipe FittingsNickel Aluminium Bronze Forging
Nickel Aluminium Bronze StripsNickel Aluminium Bronze Fasteners
Nickel Aluminium Bronze Flex pipeNickel Aluminium Bronze Plates, Sheets and Bars
Nickel Aluminium Bronze Alloy Polished PipeUNS Nickel Aluminium Bronze lined pipe
Nickel Aluminium Bronze Exhaust PipeNickel Aluminium Bronze Micro Tube
Nickel Aluminium Bronze Bar/BilletNickel Aluminium Bronze Wire/Welding Wire
Nickel Aluminium Bronze Boiler TubeNickel Aluminium Bronze Coil Tubing
Nickel Aluminium Bronze Capillary TubeNickel Aluminium Bronze U Shaped Tube
Nickel Aluminium Bronze RodsPrecision Nickel Aluminium Bronze Tubing
Nickel Aluminium Bronze SuppliersNickel Aluminium Bronze Pipe Manufacturers
Nickel Aluminium Bronze IngotsNickel Aluminium Bronze Foil
Nickel Aluminium Bronze MetalsNickel Aluminium Bronze Crucibles

Related Products:

Copper Nickel Aluminum Bronze, CuAl11Ni5Fe5, Aluminium Bronze, Copper Nickel Aluminum, Aluminum Bronze, Alum Bronze, C61400, C62400, C62500, C63200, C63000, C63020, AMS4640, NFL 14-705, AMS4590, NFL 14-706, C64700, C93200, C95400, C95500, B124, B150, B169, B170, B171, B411, MIL-B-24059, MIL-B-16166, QQ-C-465, QQ-C-465, 2.0978, DIN 17665, UA11N, NFL14706, Aircraft Bronze, BS 2872/4 CA104M, BS B 23, BS 2B 23, EN 12163/5/7 CW307G AIR 9070 UA11N, 9A Alloy

Testing & Inspection of Nickel Aluminium Bronze Forged Fittings

Testing (Destructive, Non Destructive)

Positive Material Identification – PMI TestingHydrostatic Test
Chemical Analysis – Spectro AnalysisHydrogen-Induced Cracking (HIC) Test
Mechanical Testing Such as Tensile, Elongation, Reduction of AreaSulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Micro TestRadiography Test
Macro TestDye Penetrant Test (DP Test)
Hardness TestUltra Sonic Test (UT)
Pitting Resistance TestEddy Current Testing
Intergranular Corrosion (IGC) TestImpact Test
Flaring TestBend Test
Flattening Test

Inspection

  • Our internal inspection reports would be provided for all the goods before shipment.
  • Buyers or their associates are most welcome to visit us for personal inspect
  • We regularly have inspections ongoing at our premises from internationally acclaimed Inspection Agencies such as TUV, BVIS, SGS, Llyods, DNV etc.

Prices for Nickel Aluminium Bronze Forged Fittings

Prices for Nickel Aluminium Forged Fittings, Wire are directly co related to prices of the raw materials such as iron ore, metal scrap, chromium, nickel and various other alloying elements. The production cost of heat resistant stainless steel and nickel alloy plates is high as they contain high amount of nickel and chromium. Meanwhile, mild steel material is among the lowest cost steel available, followed by carbon steel, 400 series stainless steels, aluminium, alloy steel, and 300 series stainless steel. Special alloys such as titanium, Inconel, Monel and Hastelloy cost very high as the nickel, chromium and moly content is very high.

For special and discounted prices for various types of Nickel Aluminium Bronze Forged Fittings, please feel free to contact us through email, phone or whatsapp.

We are also regularly publishing our price list for various steel products on our blog.

Documents Provided – Domestic Sales or Export of Nickel Aluminium Bronze Forged Fittings

Certificate of OriginRaw Material Test Reports
Commercial InvoiceHeat Treatment Charts
Packing ListQuality Assurance Plan (QAP)
Fumigation CertificatesNABL approved Laboratory Test Reports
Letter of GuaranteeMaterial Test Certificates
ROHS CertificateCertificate of Compliance/Conformity

Price Terms for Nickel Aluminium Bronze Forged Fittings

We can offer any of the following price basis depending on your requirement:

  • Ex-works
  • FOR Site in India
  • FOB Nhava Sheva
  • CFR, CIF, CPT your destination port
  • Door to Door Delivery Duty Paid as well as Duty Unpaid

Delivery Time of Nickel Aluminium Bronze Forged Fittings

  • If the items are available in stock, we take 2 days from the date of receipt of advance payment to clear the shipment and send it to port.
  • And in-case the items are not available in stock, the time taken for manufacturing depends on the size, quantity and grade.
  • However we can claim the fact that we can compete with anyone in India on Delivery time and most of the time our production time is the least.
  • We have tied up with strong logistic partners in India which can undertake any type of shipping activities and make sure that there is no delay in shipment.

Marking & Packing of Nickel Aluminium Bronze Forged Fittings

  • All our products will have complete marking details which are co-related to the test certificates we supply.
  • In case of orders for cut piece of Pipes, Sheets or Round Bars, the marking is transferred from the product from which it is cut. In such cases we provide Letter confirming the marking transfer and picture of the product from which it is cut.
  • All goods are packed in wooden cases or pallets.

Suppliers of Nickel Aluminium Bronze Forged Fittings in India

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Jaipur, Visakhapatnam, Kanpur, Nagpur, Lucknow, Thane, Bhopal, Indore, Pimpri Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Agra, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivli, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Howrah, Ranchi, Gwalior, Jabalpur, Coimbatore, Vijayawada, Jodhpur, Madurai, Raipur, Chandigarh, Guntur, Guwahati, Solapur, Hubli–Dharwad, Mysore, Tiruchirappalli, Bareilly, Moradabad, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Jalgaon, Kota, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Rourkela, Nanded, Kolhapur, Ajmer, Akola, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Thiruvananthapuram, Udaipur, Kakinada, Davanagere, Kozhikode, Maheshtala, Rajpur, Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Sagar, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Sambalpur, Bilaspur, Shahjahanpur, Satara, Bijapur, Kurnool, Rampur, Shimoga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Nizamabad, Parbhani, Tumkur, Khammam, Ozhukarai, Bihar Sharif, Panipat, Darbhanga, Bally, Aizawl, Dewas, Ichalkaranji, Karnal, Bathinda, Jalna, Eluru, Barasat, Kirari Suleman Nagar, Purnia, Satna, Mau, Sonipat, Farrukhabad, Durg, Imphal, Ratlam, Hapur, Arrah, Anantapur, Karimnagar, Etawah, Ambarnath, North Dumdum, Bharatpur, Begusarai, New Delhi, Gandhidham, Baranagar, Tiruvottiyur, Pondicherry, Sikar, Thoothukudi, Rewa, Mirzapur, Raichur, Pali, Ramagundam, Haridwar, Vijayanagaram, Tenali, Nagercoil, Sri Ganganagar, Karawal Nagar, Mango, Thanjavur, Bulandshahr, Uluberia, Katni, Sambhal, Singrauli, Nadiad, Secunderabad, Naihati, Yamunanagar, Bidhannagar, Pallavaram, Bidar, Munger, Panchkula, Burhanpur, Raurkela Industrial Township, Kharagpur, Dindigul, Gandhinagar, Hospet, Nangloi Jat, Malda, Ongole, Deoghar, Chapra, Haldia, Khandwa, Nandyal, Morena, Amroha, Anand, Bhind, Bhalswa Jahangir Pur, Madhyamgram, Bhiwani, Berhampore, Ambala, Morbi, Fatehpur, Raebareli, Mahaboobnagar, Chittoor, Bhusawal, Orai, Bahraich, Vellore, Mehsana, Raiganj, Sirsa, Danapur, Serampore, Sultan Pur Majra, Guna, Jaunpur, Panvel, Shivpuri, Surendranagar Dudhrej, Unnao, Chinsurah, Alappuzha, Kottayam, Machilipatnam, Shimla. Adoni, Udupi, Katihar, Proddatur, Saharsa, Hindupur, Sasaram, Hajipur, Bhimavaram, Kumbakonam, Dehri, Madanapalle, Siwan, Bettiah, Guntakal, Srikakulam, Motihari, Dharmavaram, Gudivada, Phagwara, Narasaraopet, Suryapet, Miryalaguda, Tadipatri, Karaikudi, Kishanganj, Jamalpur, Ballia, Kavali, Tadepalligudem, Amaravati, Buxar, Jehanabad, Aurangabad, Gangtok

Exporters of Nickel Aluminium Bronze Forged Fittings

  • America: Antigua and Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Suriname, Trinidad and Tobago, United States, Uruguay, Venezuela
  • Europe – Albania, Andorra, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Euro area, Faroe Islands, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Isle of Man, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom
  • Africa – Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea Bissau, Ivory Coast, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Republic of the Congo, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
  • Asia – Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, East Timor, Georgia, Hong Kong, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Macao, Malaysia, Maldives, Mongolia, Myanmar, Nepal, Oman, Palestine, Philippines, Qatar, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Turkmenistan, United Arab Emirates, Uzbekistan, Vietnam, Yemen
  • Australia – Australia, Fiji, Kiribati, New Caledonia, New Zealand, Papua New Guinea, Samoa, Solomon Islands, Tonga, Vanuatu