Inconel 601 Fastener Manufacturer, Supplier, Stockist – Screws, Threaded Rod, Bolts, Nuts, Washers, Anchor – Inconel Alloy 601  Fastener Dealers Worldwide!

  • We are a leading professional manufacturer and supplier of various types of Inconel 601 fasteners (Sizes M6 to M72) such as bolts, nuts, screws, threaded rods, washers, rivets, anchors, cotter pins, clevis pins, hose clamps, and metal stamping’s. We also produce non-standard inch and metric fasteners according to customer drawings and samples. We supply DIN, EN, ISO, ANSI, ASME, ASTM, BS, JIS, UNI and more metric and inch standard fasteners, non-standard and customized fasteners – DIN (912, 931, 933, 934, 125, etc.); ISO (4014, 4017, 4032, 4035, etc.); ASME (B18.2.1, B18.2.2, B18.2.3, etc.).
  • Manufacturing Process of  Inconel 601 Nuts, Bolts and Fasteners: – To achieve the high precision requires, our Inconel 601 bolt/screw, nut and washer are produced by the following manufacturing techniques:
    • Lathing and CNC lathing – for surface and threads
    • Milling and CNC milling – for screw’s head
    • Drilling and punching – for washers
    • Threads rolling – for threads
    • Finished Inconel 601 fasteners will be appropriately annealed to relief residual stress and inspected by Go/no go gauge for every piece.
  • For screw and bolts, we can offer full threads, half threads or particularly according to your drawing. Washer and spacers are precision cut from sheet products or stamped by designed molds. Rivets are pins are produced from wire or rods, by further cutting, bending or punching.
  • Inconel 601 Bolt is readily fabricated by either hot-working and cold-working, machining, or welding. Although Inconel 601 Fasteners & Inconel 601 Bolts are very difficult to machine as compared to steel, since Inconel 601 work-hardens very quickly. Inconel 601 Fastener Manufacturers have to turn and work with the alloy at slow speeds and low feed rates. In comparison to stainless steel, the Inconel 601 Bolts price is much more expensive, therefore the use of Inconel 601 has been limited to only these applications where it is impossible to replace them.
  • All Inconel 601 and Inconel Alloy 601 distributor in India. Please rest assured to wholesale quality products at stock price from our factory. We specialize in Inconel 601 nuts, bolts and fasteners manufacturing and are made to requested size & tolerance, or to specific drawing.
  • We are manufacturing Inconel 601 fasteners by following a stringent quality control program and standards which assure good surface and close dimensional tolerances. We are a global industry leading provider of carbon steel, alloy steel and stainless steel fastener solutions and have obtained ASME Quality and ISO 9001:2015 Certifications.
  • All our fastener products are supplied with 3.1 specific test certificates, according to EN 10204. Certification according to 3.2 can be agreed at the time of ordering. Metallica makes it easy for you to source top quality steel fasteners at the lowest prices.
  • Common types of Inconel 601 Fasteners
    • Heads of bolt and screw – hexagon, hex flange, spherical, cap, square, pan, countersunk, tapered, button
    • Threads of bolt and screw – full threaded, half threaded
    • Drive inserts of screw- hex socket, square socket, slotted, torx, cross recessed
    • Stud – threaded, double end threaded
    • Nut – hex, hex flange, hex thin, square, cap
    • Washer – plain, flat, spring

Inconel 601 or Alloy 601 (UNS N06601, 2.4851) Nuts, Bolts, Fasteners Product Specification, Stock & Supply Range

ProductInconel Alloy 601 Nuts, Bolts & Fasteners
SpecificationsASTM B166 / ASME SB166
EquivalentsAlloy 601, UNS N06601, 2.4851
SizeM02 to M160
Length3 mm to 200 mm
Inconel Fasteners ThreadsBSW, UNC, BSF, UNF METRIC, or as required. M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc.
StandardJIS, ASTM,BS, GB, DIN, IS, ISO, ANSI, ASME B18.5, ANSI B 28.2.4 1M, Stud Bolt length are defined in ASME B16.5 standard; ANSI B 18.2.4 2M; Hex nuts are defined in ASME B18.2.2; DIN: DIN 931, DIN 970, 934 DIN DIN 933; UTS: NPTF, UNS, NPT, UNF, UNC, UNEF; ISO: 4033 ,ISO 4032, JIS standards
Fastener TypesBolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts
Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab
Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts
Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws.
Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.
ManufactureCNC Machined , Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Hot Forged , Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
ASME B18.16.6 Prevailing Torque Locknuts, ASME B18.13 Screw and Washer, ASME B18.18 Fasteners
Inconel Fasteners Standard : ANSI / ASME B18.2.1, B18.3, B18.6.3, B18.6.7M, B1.1, B16.47, B18.2.2, B18.22.1
FormsSquare, Round, Threading as per Gauge, Round Etc.
Surface FinishZinc (yellow, white, blue, black), black oxide, Dacroment, Geometry, nickel plated, anodizing, plated zinc-nickel, Stainless steel: Passivated, Bright Zinc Plated (BZP), Self-Colour, Hot Dip Galvanised (HDG), Stainless Steel, Sherardized, Mechanically Applied coating and some special one like DACROMET
Production ProcessHot forging M24-M100, M2-M24: Cold Forging for Customized connecting element machining and CNC
Bolts Head DriveSix-Lobe, Phillips/Slot, Slotted, Phillips, etc.
Surface Coating of Inconel Fasteners MaterialsXylon Fasteners, Cadmium Fasteners, Teflon Fasteners, Hot Dipped Galvanizing Fasteners, Phosphate Fasteners, Zinc Fasteners, Ptfe Coated Fasteners, All surface finishes can be supplied, including Nickel, Geomet, Zinc, Dacromet, Galvanised, Electroless Sherardized & PTFE.
PackingIn Bulk: pallet, Canton, Small Carton / Boxes / Pallet, or customer request
Specialized manufacturer ofInconel High Tensile Fasteners, Bolts
Test CertificatesEN 10204 / 3.1, Third Party Inspection Report, Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report

Inconel 601 (UNS N06601, 2.4851) Product Forms & Standards

Product FormsStandards
Inconel Alloy 601 Rod, Bar & WireASTM B166
Inconel Alloy 601 Plate, Sheet & StripASTM B168, ASTM B906
Inconel Alloy 601 Seamless Pipe and TubeASTM B167, ASTM B829
Inconel Alloy 601 Welded PipeASTM B775
Inconel Alloy 601 Welded TubeASTM B751
Inconel Alloy 601 Buttweld Pipe FittingsASTM B366
Inconel Alloy 601 ForgingsASTM B564

Chemical Composition of Inconel 601 Nuts, Bolts, Fasteners

ElementValue %
Nickel58.0-63.0
Chromium21.0-25.0
IronRemainder
Aluminum1.0-1.7
Carbon≤0.10
Manganese≤1.0
Sulfur≤0.015
Silicon≤0.50
Copper≤1.0

Mechanical & Physical Properties of Inconel 601 (Annealed) Nuts, Bolts, Fasteners

Density, g/c㎡8.11
Melting range, ℃1360-1411
Tensile strength, min, Mpa550
Yield strength, 0.2% offset, min, Mpa205
Elongation, %40
Hardness, Rb60-80

About Alloy 601 or Inconel 601 – What is Alloy 601?

Inconel 601 is similar to 600 in that its composition is nickel-chromium-iron, but the addition of aluminum differentiates it. Adding in the aluminum creates a higher resistance to oxidation than Inconel 600, and is often used in general-purpose engineering for high temperature conditions that require extraordinary resistance. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. It is commonly used in thermal capacities, industrial heat conditions and other operations requiring heat; the metal does not respond to heat conditions or treatments. Inconel 601 is also found in water environments; the metal shows high resistance to corrosion from water. Like Inconel 600, Inconel 601 only responds to cold-working practices and its mechanical properties are applicable for many areas of use. Therefore, it is classified as a super alloy/high performance alloy. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments.

What are the Properties of Inconel 601 or Alloy 601 Nuts, Bolts, Fasteners?

  • Corrosion Resistance: Alloy 601 is firmly resistant to oxidation at the elevated temperature. It also prevents spalling up to 1260oC. Resists spalling even under severe thermal cycling conditions
  • Highly resistant to carburization
  • Good creep rupture strength
  • Metallurgical stability
  • Machining: Alloy 601 can be machined using the traditional machining methods. It has greater strength than standard steel grades and work hardens while machining therefore use of heavy duty machining tools is recommended.
  • Forming: Alloy 601 is easily formed by standard methods. It is stronger than regular steel. Heavy duty lubricants are used while cold forming.
  • Welding: Alloy 601 can be easily welded using the traditional welding techniques.

What are the Applications of Inconel Alloy 601 Nuts, Bolts, Fasteners?

Inconel 601 is widely used for applications demanding high temperature strength and control on oxidation. As it has higher strength as compared to standard grades, it is fit for heavier refractory above 1150 Deg C.. Inconel 601 alloy is used in various applications as below:

  • Aerospace
  • Heat treating industry
  • Heat treating muffles and retorts
  • Radiant tubes
  • Catalyst support grids in nitric acid production
  • Steam superheater tube supports
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Testing & Inspection of Inconel 601 Nuts, Bolts, Fasteners

Testing (Destructive, Non Destructive)

Positive Material Identification – PMI TestingHydrostatic Test
Chemical Analysis – Spectro AnalysisHydrogen-Induced Cracking (HIC) Test
Mechanical Testing Such as Tensile, Elongation, Reduction of AreaSulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Micro TestRadiography Test
Macro TestDye Penetrant Test (DP Test)
Hardness TestUltra Sonic Test (UT)
Pitting Resistance TestEddy Current Testing
Intergranular Corrosion (IGC) TestImpact Test
Flaring TestBend Test
Flattening Test

Inspection

  • Our internal inspection reports would be provided for all the goods before shipment.
  • Buyers or their associates are most welcome to visit us for personal inspect
  • We regularly have inspections ongoing at our premises from internationally acclaimed Inspection Agencies such as TUV, BVIS, SGS, Llyods, DNV etc.

Prices for Inconel Alloy 601 Nuts, Bolts, Fasteners

Prices for Inconel 601 Nuts, Bolts, Fasteners are directly co related to prices of the raw materials such as iron ore, metal scrap, chromium, nickel and various other alloying elements. The production cost of heat resistant stainless steel and nickel alloy plates is high as they contain high amount of nickel and chromium. Meanwhile, mild steel material is among the lowest cost steel available, followed by carbon steel, 400 series stainless steels, aluminium, alloy steel, and 300 series stainless steel. Special alloys such as titanium, Inconel, Monel and Hastelloy cost very high as the nickel, chromium and moly content is very high.

For special and discounted prices for various types of Inconel 601 Nuts, Bolts, Fasteners, please feel free to contact us through email, phone or whatsapp.

We are also regularly publishing our price list for various steel products on our blog.

Documents Provided – Domestic Sales or Export of Inconel 601 Nuts, Bolts, Fasteners

Certificate of OriginRaw Material Test Reports
Commercial InvoiceHeat Treatment Charts
Packing ListQuality Assurance Plan (QAP)
Fumigation CertificatesNABL approved Laboratory Test Reports
Letter of GuaranteeMaterial Test Certificates
ROHS CertificateCertificate of Compliance/Conformity

Price Terms for Inconel 601 Nuts, Bolts, Fasteners

We can offer any of the following price basis depending on your requirement:

  • Ex-works
  • FOR Site in India
  • FOB Nhava Sheva
  • CFR, CIF, CPT your destination port
  • Door to Door Delivery Duty Paid as well as Duty Unpaid

Delivery Time of Inconel 601 Nuts, Bolts, Fasteners

  • If the items are available in stock, we take 2 days from the date of receipt of advance payment to clear the shipment and send it to port.
  • And in-case the items are not available in stock, the time taken for manufacturing depends on the size, quantity and grade.
  • However we can claim the fact that we can compete with anyone in India on Delivery time and most of the time our production time is the least.
  • We have tied up with strong logistic partners in India which can undertake any type of shipping activities and make sure that there is no delay in shipment.

Marking & Packing of Inconel Alloy 601 Nuts, Bolts, Fasteners

  • All our products will have complete marking details which are co-related to the test certificates we supply.
  • In case of orders for cut piece of Pipes, Sheets or Round Bars, the marking is transferred from the product from which it is cut. In such cases we provide Letter confirming the marking transfer and picture of the product from which it is cut.
  • All goods are packed in wooden cases or pallets.

Suppliers of Inconel Alloy 601 Nuts, Bolts, Fasteners in India

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Jaipur, Visakhapatnam, Kanpur, Nagpur, Lucknow, Thane, Bhopal, Indore, Pimpri Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Agra, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivli, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Howrah, Ranchi, Gwalior, Jabalpur, Coimbatore, Vijayawada, Jodhpur, Madurai, Raipur, Chandigarh, Guntur, Guwahati, Solapur, Hubli–Dharwad, Mysore, Tiruchirappalli, Bareilly, Moradabad, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Jalgaon, Kota, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Rourkela, Nanded, Kolhapur, Ajmer, Akola, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Thiruvananthapuram, Udaipur, Kakinada, Davanagere, Kozhikode, Maheshtala, Rajpur, Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Sagar, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Sambalpur, Bilaspur, Shahjahanpur, Satara, Bijapur, Kurnool, Rampur, Shimoga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Nizamabad, Parbhani, Tumkur, Khammam, Ozhukarai, Bihar Sharif, Panipat, Darbhanga, Bally, Aizawl, Dewas, Ichalkaranji, Karnal, Bathinda, Jalna, Eluru, Barasat, Kirari Suleman Nagar, Purnia, Satna, Mau, Sonipat, Farrukhabad, Durg, Imphal, Ratlam, Hapur, Arrah, Anantapur, Karimnagar, Etawah, Ambarnath, North Dumdum, Bharatpur, Begusarai, New Delhi, Gandhidham, Baranagar, Tiruvottiyur, Pondicherry, Sikar, Thoothukudi, Rewa, Mirzapur, Raichur, Pali, Ramagundam, Haridwar, Vijayanagaram, Tenali, Nagercoil, Sri Ganganagar, Karawal Nagar, Mango, Thanjavur, Bulandshahr, Uluberia, Katni, Sambhal, Singrauli, Nadiad, Secunderabad, Naihati, Yamunanagar, Bidhannagar, Pallavaram, Bidar, Munger, Panchkula, Burhanpur, Raurkela Industrial Township, Kharagpur, Dindigul, Gandhinagar, Hospet, Nangloi Jat, Malda, Ongole, Deoghar, Chapra, Haldia, Khandwa, Nandyal, Morena, Amroha, Anand, Bhind, Bhalswa Jahangir Pur, Madhyamgram, Bhiwani, Berhampore, Ambala, Morbi, Fatehpur, Raebareli, Mahaboobnagar, Chittoor, Bhusawal, Orai, Bahraich, Vellore, Mehsana, Raiganj, Sirsa, Danapur, Serampore, Sultan Pur Majra, Guna, Jaunpur, Panvel, Shivpuri, Surendranagar Dudhrej, Unnao, Chinsurah, Alappuzha, Kottayam, Machilipatnam, Shimla. Adoni, Udupi, Katihar, Proddatur, Saharsa, Hindupur, Sasaram, Hajipur, Bhimavaram, Kumbakonam, Dehri, Madanapalle, Siwan, Bettiah, Guntakal, Srikakulam, Motihari, Dharmavaram, Gudivada, Phagwara, Narasaraopet, Suryapet, Miryalaguda, Tadipatri, Karaikudi, Kishanganj, Jamalpur, Ballia, Kavali, Tadepalligudem, Amaravati, Buxar, Jehanabad, Aurangabad, Gangtok

Exporters of Inconel Alloy 601 Nuts, Bolts, Fasteners

  • America: Antigua and Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Suriname, Trinidad and Tobago, United States, Uruguay, Venezuela
  • Europe – Albania, Andorra, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Euro area, Faroe Islands, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Isle of Man, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom
  • Africa – Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea Bissau, Ivory Coast, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Republic of the Congo, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
  • Asia – Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, East Timor, Georgia, Hong Kong, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Macao, Malaysia, Maldives, Mongolia, Myanmar, Nepal, Oman, Palestine, Philippines, Qatar, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Turkmenistan, United Arab Emirates, Uzbekistan, Vietnam, Yemen
  • Australia – Australia, Fiji, Kiribati, New Caledonia, New Zealand, Papua New Guinea, Samoa, Solomon Islands, Tonga, Vanuatu