Inconel 600 Fastener Manufacturer, Supplier, Stockist – Screws, Threaded Rod, Bolts, Nuts, Washers, Anchor – Inconel Alloy 600  Fastener Dealers Worldwide!

  • We are a leading professional manufacturer and supplier of various types of Inconel 600 fasteners (Sizes M6 to M72) such as bolts, nuts, screws, threaded rods, washers, rivets, anchors, cotter pins, clevis pins, hose clamps, and metal stamping’s. We also produce non-standard inch and metric fasteners according to customer drawings and samples. We supply DIN, EN, ISO, ANSI, ASME, ASTM, BS, JIS, UNI and more metric and inch standard fasteners, non-standard and customized fasteners – DIN (912, 931, 933, 934, 125, etc.); ISO (4014, 4017, 4032, 4035, etc.); ASME (B18.2.1, B18.2.2, B18.2.3, etc.).
  • Manufacturing Process of  Inconel 600 Nuts, Bolts and Fasteners: – To achieve the high precision requires, our Inconel 600 bolt/screw, nut and washer are produced by the following manufacturing techniques:
    • Lathing and CNC lathing – for surface and threads
    • Milling and CNC milling – for screw’s head
    • Drilling and punching – for washers
    • Threads rolling – for threads
    • Finished Inconel 600 fasteners will be appropriately annealed to relief residual stress and inspected by Go/no go gauge for every piece.
  • For screw and bolts, we can offer full threads, half threads or particularly according to your drawing. Washer and spacers are precision cut from sheet products or stamped by designed molds. Rivets are pins are produced from wire or rods, by further cutting, bending or punching.
  • Inconel 600 Bolt is readily fabricated by either hot-working and cold-working, machining, or welding. Although Inconel 600 Fasteners & Inconel 600 Bolts are very difficult to machine as compared to steel, since Inconel 600 work-hardens very quickly. Inconel 600 Fastener Manufacturers have to turn and work with the alloy at slow speeds and low feed rates. In comparison to stainless steel, the Inconel 600 Bolts price is much more expensive, therefore the use of Inconel 600 has been limited to only these applications where it is impossible to replace them .
  • All Inconel 600 and Inconel Alloy 600 distributor in India. Please rest assured to wholesale quality products at stock price from our factory. We specialize in Inconel 600 nuts, bolts and fasteners manufacturing and are made to requested size & tolerance, or to specific drawing.
  • We are manufacturing Inconel 600 fasteners by following a stringent quality control program and standards which assure good surface and close dimensional tolerances. We are a global industry leading provider of carbon steel, alloy steel and stainless steel fastener solutions and have obtained ASME Quality and ISO 9001:2015 Certifications.
  • All our fastener products are supplied with 3.1 specific test certificates, according to EN 10204. Certification according to 3.2 can be agreed at the time of ordering. Metallica makes it easy for you to source top quality steel fasteners at the lowest prices.
  • Common types of Inconel 600 Fasteners
    • Heads of bolt and screw – hexagon, hex flange, spherical, cap, square, pan, countersunk, tapered, button
    • Threads of bolt and screw – full threaded, half threaded
    • Drive inserts of screw- hex socket, square socket, slotted, torx, cross recessed
    • Stud – threaded, double end threaded
    • Nut – hex, hex flange, hex thin, square, cap
    • Washer – plain, flat, spring

Inconel 600 Nuts, Bolts, Fasteners Product Specification & Supply Range

ProductInconel Alloy 600 Nuts, Bolts & Fasteners
SpecificationsASTM B166 / ASME SB166
EquivalentsAlloy 600, UNS N06600, 2.4816
SizeM02 to M160
Length3 mm to 200 mm
Inconel Fasteners ThreadsBSW, UNC, BSF, UNF METRIC, or as required. M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc.
StandardJIS, ASTM,BS, GB, DIN, IS, ISO, ANSI, ASME B18.5, ANSI B 28.2.4 1M, Stud Bolt length are defined in ASME B16.5 standard; ANSI B 18.2.4 2M; Hex nuts are defined in ASME B18.2.2; DIN: DIN 931, DIN 970, 934 DIN DIN 933; UTS: NPTF, UNS, NPT, UNF, UNC, UNEF; ISO: 4033 ,ISO 4032, JIS standards
Fastener TypesBolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts
Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab
Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts
Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws.
Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.
ManufactureCNC Machined , Nut / Bolt; up to M100 / 4” Dia, up to 1500mm lg
Hot Forged , Nut / Bolt; up to M36 / 1-1/2” Dia, up to 1100mm lg
ASME B18.16.6 Prevailing Torque Locknuts, ASME B18.13 Screw and Washer, ASME B18.18 Fasteners
Inconel Fasteners Standard : ANSI / ASME B18.2.1, B18.3, B18.6.3, B18.6.7M, B1.1, B16.47, B18.2.2, B18.22.1
FormsSquare, Round, Threading as per Gauge, Round Etc.
Surface FinishZinc (yellow, white, blue, black), black oxide, Dacroment, Geometry, nickel plated, anodizing, plated zinc-nickel, Stainless steel: Passivated, Bright Zinc Plated (BZP), Self-Colour, Hot Dip Galvanised (HDG), Stainless Steel, Sherardized,Mechanically Applied coating and some special one like DACROMET
Production ProcessHot forging M24-M100, M2-M24: Cold Forging for Customized connecting element machining and CNC
Bolts Head DriveSix-Lobe, Phillips/Slot, Slotted, Phillips, etc.
Surface Coating of Inconel Fasteners MaterialsXylon Fasteners, Cadmium Fasteners, Teflon Fasteners, Hot Dipped Galvanizing Fasteners, Phosphate Fasteners, Zinc Fasteners, Ptfe Coated Fasteners, All surface finishes can be supplied, including Nickel, Geomet, Zinc, Dacromet, Galvanised, Electroless Sherardized & PTFE.
PackingIn Bulk: pallet, Canton, Small Carton / Boxes / Pallet, or customer request
Specialized manufacturer ofInconel High Tensile Fasteners, Bolts
Test CertificatesEN 10204 / 3.1, Third Party Inspection Report, Raw Materials Certificate, EN 10204/3.1B, 100% Radiography Test Report

Inconel 600 (UNS N06600, 2.4816) Product Forms & Standards

Product FormsStandards
Inconel Alloy 600 Rod, Bar, & WireASTM B166
Inconel Alloy 600 Plate, Sheet, & StripASTM B168, ASTM B906
Inconel Alloy 600 Seamless Pipe and TubeASTM B167, ASTM B829
Inconel Alloy 600 Welded PipeASTM B517, ASTM B775
Inconel Alloy 600 Welded TubeASTM B516, ASTM B751
Inconel Alloy 600 Pipe FittingASTM B366
Inconel Alloy 600 Billet and BarASTM B472
Inconel Alloy 600 ForgingASTM B564

Chemical Composition of Inconel 600 Nuts, Bolts, Fasteners

Element% Value
Ni72.0 min
Cu0.5 max
Fe6.0 – 10.0
Mn1.0 max
C0.15 max
Si0.5 max
S0.015 max
Cr14.0 – 17.0

Mechanical & Physical Properties of Inconel 600 Nuts, Bolts, Fasteners

Density, g/c㎡8.47
Melting range, ℃1354-1413
Tensile strength, min, Mpa550
Yield strength, 0.2% offset, min, Mpa240
Elongation, %30
Hardness : Unit – HRBB 92 max

About Alloy 600 or Inconel 600

  • Inconel alloys or superalloys are austenitic nickel-chromium-based superalloys that exhibit qualities such as high resistance to corrosion, oxidation, carburization, pitting, crevice, corrosion cracking, and high temperature strength.
  • Inconel alloys are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. When heated, Inconel forms a thick, stable, passivating oxide layer protecting the surface from further attack.
  • Inconel retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel’s high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy.

Inconel 600, a nickel – base alloy with excellent carburization; was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000 Degree F. Inconel 600 is nonmagnetic and possess an excellent combination of high strength. This material grade is readily weldable and is used in a variety of corrosion resisting applications.

What are the Properties of Inconel 600 or Alloy 600 Nuts, Bolts, Fasteners?

Inconel 600 is a standard nickel-chromium-iron alloy used in heat and corrosion resistance. The chromium component in the alloy helps to provide better resistance to oxidation than pure nickel. Inconel 600 can only be hardened by cold-working practices, making it ideal for welding, brazing and soldering. Its flexible nature is due largely in part to its ability to withstand corrosion. The metal is capable of keeping its structural integrity under a number of conditions: It is applicable across a wide range of temperatures and environments, remaining resistant to neutral and alkaline conditions. While it is moderately resistant to chlorine, it generally should not be exposed to heat when sulfur is present due to its high percentage of nickel. Chlorine exposure should also not exceed temperatures of 1000°F. Some of its key properties are as below:

  • Resistant to a wide range of corrosive media.
  • Virtually immune to chlorine ion stress corrosion cracking
  • Non-magnetic
  • Excellent mechanical properties
  • High strength and good weldability under a wide range of temperatures

What are the Applications of Inconel Alloy 600 Nuts, Bolts, Fasteners?

Inconel 600 typically finds application in marine engineering, chemical and hydro-carbon processing’s, heat exchangers, valves and pumps. Inconel 600 alloy is used in various applications as below:

  • Stacks on offshore oil platforms
  • Gas turbines, rocket motors/engines, and space craft
  • Pollution control equipment
  • Nuclear reactors
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Testing & Inspection of Inconel 600 Nuts, Bolts, Fasteners

Testing (Destructive, Non Destructive)

Positive Material Identification – PMI TestingHydrostatic Test
Chemical Analysis – Spectro AnalysisHydrogen-Induced Cracking (HIC) Test
Mechanical Testing Such as Tensile, Elongation, Reduction of AreaSulfide Stress Corrosion Cracking (SSC), NACE TM 0177
Micro TestRadiography Test
Macro TestDye Penetrant Test (DP Test)
Hardness TestUltra Sonic Test (UT)
Pitting Resistance TestEddy Current Testing
Intergranular Corrosion (IGC) TestImpact Test
Flaring TestBend Test
Flattening Test

Inspection

  • Our internal inspection reports would be provided for all the goods before shipment.
  • Buyers or their associates are most welcome to visit us for personal inspect
  • We regularly have inspections ongoing at our premises from internationally acclaimed Inspection Agencies such as TUV, BVIS, SGS, Llyods, DNV etc.

Prices for Inconel Alloy 600 Nuts, Bolts, Fasteners

Prices for Inconel 600 Nuts, Bolts, Fasteners are directly co related to prices of the raw materials such as iron ore, metal scrap, chromium, nickel and various other alloying elements. The production cost of heat resistant stainless steel and nickel alloy plates is high as they contain high amount of nickel and chromium. Meanwhile, mild steel material is among the lowest cost steel available, followed by carbon steel, 400 series stainless steels, aluminium, alloy steel, and 300 series stainless steel. Special alloys such as titanium, Inconel, Monel and Hastelloy cost very high as the nickel, chromium and moly content is very high.

For special and discounted prices for various types of Inconel 600 Nuts, Bolts, Fasteners, please feel free to contact us through email, phone or whatsapp.

We are also regularly publishing our price list for various steel products on our blog.

Documents Provided – Domestic Sales or Export of Inconel 600 Nuts, Bolts, Fasteners

Certificate of OriginRaw Material Test Reports
Commercial InvoiceHeat Treatment Charts
Packing ListQuality Assurance Plan (QAP)
Fumigation CertificatesNABL approved Laboratory Test Reports
Letter of GuaranteeMaterial Test Certificates
ROHS CertificateCertificate of Compliance/Conformity

Price Terms for Inconel 600 Nuts, Bolts, Fasteners

We can offer any of the following price basis depending on your requirement:

  • Ex-works
  • FOR Site in India
  • FOB Nhava Sheva
  • CFR, CIF, CPT your destination port
  • Door to Door Delivery Duty Paid as well as Duty Unpaid

Delivery Time of Inconel 600 Nuts, Bolts, Fasteners

  • If the items are available in stock, we take 2 days from the date of receipt of advance payment to clear the shipment and send it to port.
  • And in-case the items are not available in stock, the time taken for manufacturing depends on the size, quantity and grade.
  • However we can claim the fact that we can compete with anyone in India on Delivery time and most of the time our production time is the least.
  • We have tied up with strong logistic partners in India which can undertake any type of shipping activities and make sure that there is no delay in shipment.

Marking & Packing of Inconel Alloy 600 Nuts, Bolts, Fasteners

  • All our products will have complete marking details which are co-related to the test certificates we supply.
  • In case of orders for cut piece of Pipes, Sheets or Round Bars, the marking is transferred from the product from which it is cut. In such cases we provide Letter confirming the marking transfer and picture of the product from which it is cut.
  • All goods are packed in wooden cases or pallets.

Suppliers of Inconel Alloy 600 Nuts, Bolts, Fasteners in India

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Jaipur, Visakhapatnam, Kanpur, Nagpur, Lucknow, Thane, Bhopal, Indore, Pimpri Chinchwad, Patna, Vadodara, Ghaziabad, Ludhiana, Agra, Nashik, Faridabad, Meerut, Rajkot, Kalyan-Dombivli, Vasai-Virar, Varanasi, Srinagar, Aurangabad, Dhanbad, Amritsar, Navi Mumbai, Allahabad, Howrah, Ranchi, Gwalior, Jabalpur, Coimbatore, Vijayawada, Jodhpur, Madurai, Raipur, Chandigarh, Guntur, Guwahati, Solapur, Hubli–Dharwad, Mysore, Tiruchirappalli, Bareilly, Moradabad, Tiruppur, Gurgaon, Aligarh, Jalandhar, Bhubaneswar, Salem, Mira-Bhayandar, Warangal, Jalgaon, Kota, Bhiwandi, Saharanpur, Gorakhpur, Bikaner, Amravati, Noida, Jamshedpur, Bhilai, Cuttack, Firozabad, Kochi, Nellore, Bhavnagar, Dehradun, Durgapur, Asansol, Rourkela, Nanded, Kolhapur, Ajmer, Akola, Gulbarga, Jamnagar, Ujjain, Loni, Siliguri, Jhansi, Ulhasnagar, Jammu, Sangli-Miraj & Kupwad, Mangalore, Erode, Belgaum, Ambattur, Tirunelveli, Malegaon, Gaya, Thiruvananthapuram, Udaipur, Kakinada, Davanagere, Kozhikode, Maheshtala, Rajpur, Sonarpur, Rajahmundry, Bokaro, South Dumdum, Bellary, Patiala, Gopalpur, Agartala, Bhagalpur, Muzaffarnagar, Bhatpara, Panihati, Latur, Dhule, Tirupati, Rohtak, Sagar, Korba, Bhilwara, Berhampur, Muzaffarpur, Ahmednagar, Mathura, Kollam, Avadi, Kadapa, Kamarhati, Sambalpur, Bilaspur, Shahjahanpur, Satara, Bijapur, Kurnool, Rampur, Shimoga, Chandrapur, Junagadh, Thrissur, Alwar, Bardhaman, Kulti, Nizamabad, Parbhani, Tumkur, Khammam, Ozhukarai, Bihar Sharif, Panipat, Darbhanga, Bally, Aizawl, Dewas, Ichalkaranji, Karnal, Bathinda, Jalna, Eluru, Barasat, Kirari Suleman Nagar, Purnia, Satna, Mau, Sonipat, Farrukhabad, Durg, Imphal, Ratlam, Hapur, Arrah, Anantapur, Karimnagar, Etawah, Ambarnath, North Dumdum, Bharatpur, Begusarai, New Delhi, Gandhidham, Baranagar, Tiruvottiyur, Pondicherry, Sikar, Thoothukudi, Rewa, Mirzapur, Raichur, Pali, Ramagundam, Haridwar, Vijayanagaram, Tenali, Nagercoil, Sri Ganganagar, Karawal Nagar, Mango, Thanjavur, Bulandshahr, Uluberia, Katni, Sambhal, Singrauli, Nadiad, Secunderabad, Naihati, Yamunanagar, Bidhannagar, Pallavaram, Bidar, Munger, Panchkula, Burhanpur, Raurkela Industrial Township, Kharagpur, Dindigul, Gandhinagar, Hospet, Nangloi Jat, Malda, Ongole, Deoghar, Chapra, Haldia, Khandwa, Nandyal, Morena, Amroha, Anand, Bhind, Bhalswa Jahangir Pur, Madhyamgram, Bhiwani, Berhampore, Ambala, Morbi, Fatehpur, Raebareli, Mahaboobnagar, Chittoor, Bhusawal, Orai, Bahraich, Vellore, Mehsana, Raiganj, Sirsa, Danapur, Serampore, Sultan Pur Majra, Guna, Jaunpur, Panvel, Shivpuri, Surendranagar Dudhrej, Unnao, Chinsurah, Alappuzha, Kottayam, Machilipatnam, Shimla. Adoni, Udupi, Katihar, Proddatur, Saharsa, Hindupur, Sasaram, Hajipur, Bhimavaram, Kumbakonam, Dehri, Madanapalle, Siwan, Bettiah, Guntakal, Srikakulam, Motihari, Dharmavaram, Gudivada, Phagwara, Narasaraopet, Suryapet, Miryalaguda, Tadipatri, Karaikudi, Kishanganj, Jamalpur, Ballia, Kavali, Tadepalligudem, Amaravati, Buxar, Jehanabad, Aurangabad, Gangtok

Exporters of Inconel Alloy 600 Nuts, Bolts, Fasteners

  • America: Antigua and Barbuda, Argentina, Aruba, Bahamas, Barbados, Belize, Bermuda, Bolivia, Brazil, Canada, Cayman Islands, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, Nicaragua, Panama, Paraguay, Peru, Puerto Rico, Suriname, Trinidad and Tobago, United States, Uruguay, Venezuela
  • Europe – Albania, Andorra, Austria, Belarus, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Euro area, Faroe Islands, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Isle of Man, Italy, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Malta, Moldova, Monaco, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom
  • Africa – Algeria, Angola, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Egypt, Equatorial Guinea, Eritrea, Ethiopia, Gabon, Gambia, Ghana, Guinea, Guinea Bissau, Ivory Coast, Kenya, Lesotho, Liberia, Libya, Madagascar, Malawi, Mali, Mauritania, Mauritius, Morocco, Mozambique, Namibia, Niger, Nigeria, Republic of the Congo, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, South Africa, South Sudan, Sudan, Swaziland, Tanzania, Togo, Tunisia, Uganda, Zambia, Zimbabwe
  • Asia – Afghanistan, Armenia, Azerbaijan, Bahrain, Bangladesh, Bhutan, Brunei, Cambodia, China, East Timor, Georgia, Hong Kong, Indonesia, Iran, Iraq, Israel, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Macao, Malaysia, Maldives, Mongolia, Myanmar, Nepal, Oman, Palestine, Philippines, Qatar, Saudi Arabia, Singapore, South Korea, Sri Lanka, Syria, Taiwan, Tajikistan, Thailand, Turkmenistan, United Arab Emirates, Uzbekistan, Vietnam, Yemen
  • Australia – Australia, Fiji, Kiribati, New Caledonia, New Zealand, Papua New Guinea, Samoa, Solomon Islands, Tonga, Vanuatu