Carbon Steel Pipes & Stainless Steel Seamless Pipes, Fittings, Flanges Manufacturers ! Call Us +91 8928722715 | +91 9326896179 | +91 9167989294 | Email Us - info@metallicametals.com

manufacturing process

Pipe Fittings Manufacturing Process

By |2023-08-24T15:00:30+00:00October 10th, 2020|Categories: Manufacturing Process, Pipe Fittings|Tags: , |

Introduction Pipe fittings are piping component that helps in changing the direction of the flow such as elbows, tees; changes the size of the pipe such as reducers, reducing tees; connect different components such as couplings and stop the flows such as caps, fittings. As one of the biggest manufacturer of steel pipes and pipe [...]

Galvanizing Process of Steel Materials

By |2023-08-24T15:00:32+00:00July 30th, 2019|Categories: Manufacturing Process, Steel Pipes|Tags: , , , |

What is Galvanizing? Features of Galvanized Steels Steels, galvanized steels and aluminum alloys are industrially important metals that are produced in large quantities. Of these materials the corrosion protection of steel is most challenging, even if iron is nobler than zinc or aluminum. To prevent steel parts from rusting there are two options: Switch to [...]

Heat Treatment of Steel

By |2023-08-24T15:00:32+00:00July 27th, 2019|Categories: Steel Pipes|Tags: , , , , , |

Heat treatment of pipe depends on the way it is manufactured - hot finished or cold finished. Selection of heat treatment methods will depend on types of material and on what material properties you want to restore or further enhancement on existing properties. In the case of Hot Finished Pipe, no heat treatment is required. [...]

What is a Seamless Pipe?

By |2019-07-06T11:43:42+00:00July 6th, 2019|Categories: Seamless Pipes|Tags: , |

Introduction Pipes are usually produced by two distinct methods which result in either a welded pipe or a seamless pipe. In both methods, raw material is first cast into ingots. It is then made into a pipe by stretching the steel out into a seamless tube or forcing the edges together and sealing them with [...]

Manufacturing Process For Welded Pipes

By |2019-03-17T16:05:38+00:00March 12th, 2019|Categories: Manufacturing Process|Tags: , , |

What is the Manufacturing Process for Welded Pipes? Welded Pipes are manufactured from plate or from continues coil or strips. To manufacture welded pipe, first, plate or coil is rolled in the circular section with the help of plate bending machine or by a roller in the case of continuous process. At the start of [...]

Title

Go to Top