Carbon Steel Pipes & Stainless Steel Seamless Pipes Manufacturers - Seamless Pipes Manufacturers! Call Us +918928722715 | Email Us - info@metallicametals.com

Monthly Archives: July 2019

Home/2019/July

Galvanizing Process of Steel Materials

By |2019-07-30T09:58:55+00:00July 30th, 2019|Categories: Manufacturing Process, Steel Pipes|Tags: , , , |

What is Galvanizing? Features of Galvanized Steels Steels, galvanized steels and aluminum alloys are industrially important metals that are produced in large quantities. Of these materials the corrosion protection of steel is most challenging, even if iron is nobler than zinc or aluminum. To prevent steel parts from rusting there are two options: Switch to [...]

Pipe Material, Pipe Size, Pipe Schedule and Pipe Dimensions

By |2019-07-29T11:29:55+00:00July 28th, 2019|Categories: Steel Pipes|Tags: , , , , |

[Source: From web] Steel pipe sizes "Nominal" refers to pipe in non-specific terms and identifies the diameter of the hole with a non-dimensional number (for example – 2-inch nominal steel pipe" consists of many varieties of steel pipe with the only criterion being a 2.375-inch (60.3 mm) outside diameter). Specific pipe is identified by pipe [...]

Heat Treatment of Steel

By |2019-07-29T10:53:06+00:00July 27th, 2019|Categories: Steel Pipes|Tags: , , , , , |

Heat treatment of pipe depends on the way it is manufactured - hot finished or cold finished. Selection of heat treatment methods will depend on types of material and on what material properties you want to restore or further enhancement on existing properties. In the case of Hot Finished Pipe, no heat treatment is required. [...]

We are Manufacturing Various Types of Pipe Fittings in India!

By |2020-09-27T13:07:10+00:00July 9th, 2019|Categories: Pipe Fittings|Tags: , |

Introduction to Pipe Fittings Pipe Fittings are an important piping component that helps in changing the direction of the flow such as elbows, tees, changes the size of the pipe such as reducers, reducing tees, distribute the water supply from the main pipe to other pipes of equal size or lower size, etc. connect different [...]

Types of Flanges

By |2019-08-29T06:33:33+00:00July 8th, 2019|Categories: Flanges|Tags: , |

Introduction A flange is an external or internal ridge, or rim (lip), for strength, as the flange of an iron beam such as an I-beam or a T-beam; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or for a flange of a rail car or tram wheel. Thus flanged wheels are wheels with a flange on one side to keep [...]

Difference Between Seamless and Welded Pipes

By |2019-07-08T07:13:48+00:00July 7th, 2019|Categories: Seamless Pipes, Welded Pipes|Tags: , , , |

Introduction And Difference Between Seamless and Welded Pipes Seamless Steel Pipe is made from a solid round steel ‘billet’ which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube. Seamless pipes are manufactured in a variety of size and schedule. However, there is a restriction on [...]

What is a Seamless Pipe?

By |2019-07-06T11:43:42+00:00July 6th, 2019|Categories: Seamless Pipes|Tags: , |

Introduction Pipes are usually produced by two distinct methods which result in either a welded pipe or a seamless pipe. In both methods, raw material is first cast into ingots. It is then made into a pipe by stretching the steel out into a seamless tube or forcing the edges together and sealing them with [...]

Go to Top