Carbon Steel Pipes & Stainless Steel Seamless Pipes, Fittings, Flanges Manufacturers ! Call Us +91 8928722715 | +91 9326896179 | +91 9167989294 | Email Us - info@metallicametals.com

A106 Seamless Pipes & Tubes Manufacturers

A106 Grade A, B, C Seamless Pipes

74.00

A106 Seamless Pipes Manufacturers & Suppliers

  • A106 Seamless Pipes Available on Sale in Size Range of 1/2″ NB to 24″ NB
  • For pipe NPS 11⁄2 [DN 40] and under, it shall be permissible to furnish hot finished or cold drawn.
  • Unless otherwise specified, pipe NPS 2 [DN 50] and over shall be furnished hot finished. When agreed upon between the manufacturer and the purchaser, it is permissible to furnish cold-drawn pipe.
  • ASTM A106 Carbon Steel Pipe Application : ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.

As one of the largest stockholder and supplier of A106 Grade B seamless pipes, Metallica has over 250 customers in India and overseas. The manufacturing specification, ASTM A106 generally includes 3 steel grades (Grade A, Grade B, Grade C), but ASTM A106 Grade B is most widely used grade.

ASTM A106 seamless pressure pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. A106 pipes and tubes are widely suitable for bending, flanging and similar forming operations. It is the best choice grade for general and special piping applications.

A106 seamless pipes are used for conveying oil, steam, water, gas, air at low/medium/high pressure or temperature. Additionally these pipes are also used for fire protection systems, civil engineering, architecture and other structures, shipyard, oil field, and gas field.

Description

A106 Seamless Pipes Manufacturers & Suppliers in India

As one of the biggest supplier of A106 seamless steel pipes in India, Metallica carries inventory of over 15,000 tons in its warehouses in Mumbai, Maharashtra India. We sell our ASTM A106 seamless pipe products throughout India, and to international clients. We can supply our ASTM A106 seamless steel pipe products not only in industry-standard lengths and diameters, but also in custom length and diameters. Our range of carbon steel A106 seamless pipes encompasses size range from 1/4 NPS to 24 NPS in thickness upto SCH XXS.

Chemical Composition of ASTM A106 Seamless Steel Pipes

ASTM A106 Steel Grade C, max.%Mn %P, maxS, maxSi, minCr, maxCu, maxMo, maxNi, maxV, max
Grade A0.250.27 – 0.930.0350.0350.10.40.40.150.40.08
Grade B0.30.29 – 1.060.0350.0350.10.40.40.150.40.08
Grade C0.350.29 – 1.060.0350.0350.10.40.40.150.40.08

Mechanical Properties of ASTM A106 Seamless Pipes

ASTM A106 Steel GradeTenssile Test MPa or N/mm2
MIn. Yield PointTensile Strength
Grade A205330Min
Grade B240415Min
Grade C275485Min

Equivalents of ASTM A106 Seamless Pipes

SpecificationMechanical PropertiesGrade AGrade BGrade C
ASTM A53Tenside strength, min, psi (MPa)48000(330)60000(415)
Yield strength, min, psi (MPa)30000(205)35000(240)
ASTM A106Tenside strength, min, psi (MPa)48000(330)60000(415)70000(485)
Yield strength, min, psi (MPa)30000(205)35000(240)40000(275)

Production & Supply Range for A106 Seamless Steel Pipes

ProductASTM A106 Seamless Pipes
MaterialsCarbon Steel
Outer DiameterHot finish: 2″ – 30″,Cold drawn: 0.875″ – 18″
Wall ThicknessHot finish: 0.250″ – 4.00″,Cold drawn:0.035″ – 0.875″
LengthRandom Length, Fixed Length, SRL, DRL
Heat TreatmentBright Annealed, Normalized, Stress relieved, Cold finished, Quenched and Tempered
PackingPlastic End Caps in Both Ends, Bundled Packing with Steel Strips
Testing & InspectionChemical Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test)
Test CertificatesAs per EN 10204 3.1B

Manufacturing & Testing Requirements for A106 Seamless Pipes

Heat TreatmentHot-finished pipe need not be heat treated. Cold-drawn pipe shall be heat treated after the final cold draw pass at a temperature of 1200 °F (650 °C) or higher.
Process
  • The steel shall be killed steel, with the primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining. If secondary melting, using electroslag remelting or vacuum-arc remelting is subsequently employed, the heat shall be defined as all of the ingots remelted from a single primary heat.
  • Steel cast in ingots or strand cast is permissible. When steels of different grades are sequentially strand cast, identifi- cation of the resultant transition material is required. The producer shall remove the transition material by any estab- lished procedure that positively separates the grades.
Surface TreatmentOil-dip, Varnish, Passivation, Phosphating, Shot Blasting
Hydrostatic TestingInspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum Pressures are not to exceed 2500 psi for NPS3 and must stay under 2800 psi for the larger sizes. Pressure is maintained for not less than 5 seconds.
Nondestructive Electric TestThe full body of each pipe shall be tested with a nondestructive electric test in accordance with Practice E 213, E 309, or E 570.
Mechanical Tests Specified
  • Tensile Test — NPS 8 and larger — either transverse or longitudinal acceptable smaller than NPS 8 — weighed in lots.
  • Larger sizes — by length.
  • Flattening Test — NPS 2-1/2 and larger.
  • Bending Test (Cold) — NPS 2 and under.

All our carbon steel seamless steel pipe products comply with major ASTM & Indian standards and classifications. The various quality standards according to which we can manufacture and supply carbon and alloy steel seamless steel pipes are as below:

  • API 5L Standard Specification for Seamless Line Pipe or Seamless Pipe Line
  • ASTM A 53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
  • ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing
  • ASTM A106 Seamless Carbon Steel Pipes for oil pipeline and gas pipeline transportation
  • DIN 2391 Seamless Precision Steel Tubes
  • EN10305 Steel tubes for precision applications. Technical delivery conditions. Seamless cold drawn tubes
  • EN 10297 Hot rolled seamless steel tubes with an application in the mechanical and general engineering
  • EN 10210:Seamless structural steel pipes

Wide Range of Steel Grades in Carbon Steel Seamless Pipes

  • API 5L: Grade A, Grade B, X42, X46, X52, X56, X60, X65, X70, X80
  • ASTM A 53: Grade A, Grade B, Grade C, Type F, Type E
  • ASTM A519: 1010-1045, 4130-4142, 5135
  • DIN 2391: St30Si, St30A1, St35, St45, St52
  • EN10305: E235, E355
  • EN 10297: E355K2, E470, E420J2, E590K2
  • EN 10210: S235JRH; S275J0H, S275J2H; S355J0H, S355J2H; S275NH, S355NH; S275NLH, S355NLH

Title

Go to Top